Loader BB - automation solutions for postpress
Products > Loading
Loader BB
Automatic destacking of reams and automatic transport towards the high-speed cutter.
Rear-table loading
Baumann Loaders typically load the high-speed cutter via the rear-table. The destacked reams are transported towards the cutter either by a pushing unit "BTE" or by a gripper transport system "BFS".
Front-table loading
When front table loading is desired, the destacked ream is transported semi-automatically towards the cutter either by pusher or manually by the operator.
Features
Possible destacking systems
- Reflective wedge (destacking exactly the pre-defined ream)
- Long separating strips (E-System, destacking exactly the pre-defined ream)
- Short separating strips (destacking exactly the pre-defined ream)
- Light-barrier, which is adjusted to the requested ream height (destacking roughly the requested ream, destacking of exactly the pre-defined ream is not possible)
Installation
- Longitudinal installation (the loader takes up the ream at its smaller side)
- Installation at an right angle (the loader takes up the ream at its larger side)
Loaders for formats 8 and 10 are constructed with a double-support.
Application
- Paper
- Plastic
- Chipboard or heavy cardboard
- Printing Plates
Options
- Double gripper for larger formats
- Maximum pile height 1800 mm or 2100 mm
- Calculation of the optimum ream height with respect to the given pile height
Advantages
- Very high automation level
- All relevant parameters can be adjusted to suit the product from the operator's panel
- Solid and precise construction
- Automatic destacking of small formats is possible
- Universal application
Technical Data
| BB 3 | BB 5 | BB 6 | BB 7 | BB 10 | |
| Format [mm] | 770 x 1070 | 920 x 1300 | 1050 x 1450 | 1250 x 1650 | 1525 x 2050 |
| Max. ream weight [kg] | 150 | 150 | 300 | 300 | 300 |
| Ream Height [mm] | 160 | 160 | 160 | 160 | 160 |
Pile height [mm] | 1400 / 1800 | 1400 / 1800 | 1400 / 1800 | 1400 / 1800 | 1400 / 1800 |
The values can vary depending on the equipment / additional options. Technical changes reserved.